{"title":"Two-Gauge Digital Gauge Kit","description":null,"products":[{"product_id":"2-gauge-direct-sensor-starter-kit","title":"2-Gauge Round Digital Gauge Kit — Direct Sensor","description":"\u003cp dir=\"ltr\"\u003eThe 2-Gauge Round Digital Gauge Kit — Direct Sensor Kit reads your engine the same way your original gauges did, directly off the sending units, then puts that data on a full-color display that drops into a standard gauge opening.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003ePoint-to-point wiring, modern hardware behind the glass. Your dash keeps its period-correct look, and you get accurate, repeatable readings you can restyle from your phone.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eWhat's included\u003c\/h4\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eTwo fully digital LCD gauges, 400 nits. Easily readable.\u003c\/li\u003e\n\u003cli\u003ePod housings in PA12 (MJF), an industrial nylon that holds its shape through desert summer heat where standard printed or molded housings warp.\u003c\/li\u003e\n\u003cli\u003eRestoTach Main Hub, which handles every sensor input and drives all displays.\u003c\/li\u003e\n\u003cli\u003eComplete wiring harness, one harness covering every connection in the system: display communication and power, temperature, pressure, and fuel level sensor leads, turn signal inputs, and the RPM lead for coil-negative or ECU tach output.\u003c\/li\u003e\n\u003cli\u003eGPS antenna that plugs into the hub's GPS port.\u003c\/li\u003e\n\u003cli\u003eMounting hardware for hub and displays.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eSensors are selected before checkout. Choose the sending units that match your build.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eBuilt to work with what your car already has\u003c\/h4\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect sensor inputs.\u003c\/strong\u003e Oil pressure, coolant temperature, and fuel level read straight from standard automotive sending units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTach from either source.\u003c\/strong\u003e Wire to coil negative on a points or HEI setup, or to your ECU's tach output. The hub takes both.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurn signal indicators built in.\u003c\/strong\u003e Left and right indicators live on the gauge face, allow one on each gauge or both on the same gauge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPS speed.\u003c\/strong\u003e Vehicle speed comes from the included GPS antenna. No VSS, no speedometer cable, no drive gear to match. Nothing to calibrate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrightness control with automatic dimming.\u003c\/strong\u003e Set the level you want, or let the gauges dim themselves as the day turns over.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to two parameters per gauge.\u003c\/strong\u003e Run dual analog or digital styles with customizable features.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 dir=\"ltr\"\u003eOne hub. Every configuration.\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003eThe hardware in this kit is the same hardware in every RestoTach kit. The only difference between them is which harness is in the box and whether an OBDLink MX+ is included. The hub itself is identical.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThat means nothing here is a dead end. Add an OBDLink MX+ later and the same hub switches over to OBD-II, or runs both sources side by side. Swap engines, change how the car is set up, or move the system to a different vehicle, and the hub follows you. You buy the hub once.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe system gets better after you install it. As we release new features, themes, and improvements, they download through the companion app straight to your hub and displays. No pulling the dash, no shipping hardware back, no cables. The gauges you install today keep gaining capability.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe hub also supports up to seven displays. Start with two and add more as the build comes together. New gauges join the existing bus and configure from the same app.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eMake it yours\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003eEleven built-in themes ship on every display: Base, Sports, Obsidian, Alabaster, Cobalt, Neon, GT, Square Body, Stealth, Carbon, and Classic White. Switch between them in the companion app in seconds, with no tools and no pulling the dash.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBeyond themes, you can control needle style, tick marks, numerals, custom face uploads, custom needle uploads, and full 360° face rotation, so the gauge reads level no matter how the pod ends up mounted.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eFitment\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003eAvailable in three standard gauge sizes. Pod outer diameter matches the opening. Measure your bezel clearance and depth behind the dash before ordering.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eNot intended for street use.\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eGauge size\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBezel diameter\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePod depth\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2 1\/16\"\u003c\/td\u003e\n\u003ctd\u003e2.58\"\u003c\/td\u003e\n\u003ctd\u003e1.26\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2 5\/8\"\u003c\/td\u003e\n\u003ctd\u003e3.10\"\u003c\/td\u003e\n\u003ctd\u003e1.43\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3 3\/8\"\u003c\/td\u003e\n\u003ctd\u003e3.96\"\u003c\/td\u003e\n\u003ctd\u003e1.395\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch4 dir=\"ltr\"\u003eSpecifications\u003c\/h4\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003e\u003c\/th\u003e\n\u003cth scope=\"col\"\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSizes\u003c\/td\u003e\n\u003ctd\u003e2 1\/16\", 2 5\/8\", 3 3\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrightness\u003c\/td\u003e\n\u003ctd\u003e400 nits, adjustable, with automatic time-based dimming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing\u003c\/td\u003e\n\u003ctd\u003ePA12 nylon, MJF printed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eWi-Fi to companion app (iOS\/Android)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeed source\u003c\/td\u003e\n\u003ctd\u003eGPS antenna (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTach source\u003c\/td\u003e\n\u003ctd\u003eCoil negative or ECU tach output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eData sources\u003c\/td\u003e\n\u003ctd\u003eDirect sensor standard; OBD-II with OBDLink MX+ (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpdates\u003c\/td\u003e\n\u003ctd\u003eNew features and themes download to hub and displays through the app\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e12V automotive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax displays per hub\u003c\/td\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReturns \u0026amp; Warranty\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e30 days from date of shipment for returns, 120 days from date of shipment for warranty claims\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"RestoTach","offers":[{"title":"Default Title","offer_id":48045991952515,"sku":null,"price":949.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/1855\/3219\/files\/ChatGPTImageAug31_2026_01_29_11PM_7.png?v=1788208661"},{"product_id":"two-gauge-obd-ii-digital-gauge-kit","title":"2-Gauge Round Digital Gauge Kit — OBD2","description":"\u003cp dir=\"ltr\"\u003eThe 2-Gauge Round Digital Gauge Kit — OBD2 Kit plugs into your diagnostic port and puts real ECU data on full-color displays that drop into standard gauge openings. No sending units to buy, no sensors to thread into your block, no splicing into the engine harness.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eModern hardware behind the glass, period-correct look on the dash, and readings you can restyle from your phone.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eWhat's included\u003c\/h4\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eTwo fully digital LCD gauges, 400 nits. Easily readable.\u003c\/li\u003e\n\u003cli\u003ePod housings in PA12 (MJF), an industrial nylon that holds its shape through desert summer heat where standard printed or molded housings warp.\u003c\/li\u003e\n\u003cli\u003eRestoTach Main Hub, which handles every input and drives all displays.\u003c\/li\u003e\n\u003cli\u003eOBDLink MX+ adapter, which connects the hub to your vehicle's diagnostic port.\u003c\/li\u003e\n\u003cli\u003eComplete wiring harness, one harness covering every connection in the system: display communication and power, and turn signal inputs.\u003c\/li\u003e\n\u003cli\u003eGPS antenna that plugs into the hub's GPS port.\u003c\/li\u003e\n\u003cli\u003eMounting hardware for hub and displays.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 dir=\"ltr\"\u003eReads what your vehicle already reports\u003c\/h4\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eLive ECU data.\u003c\/strong\u003e Coolant temperature, RPM, speed, throttle position, intake air temperature, fuel level, boost, timing, and any other parameter your vehicle reports over OBD-II.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagnostics on the dash.\u003c\/strong\u003e Read stored and pending trouble codes, get notified when a code sets, check emissions readiness monitors, and clear codes when the repair is done. No scan tool, no trip to the parts store.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurn signal indicators built in.\u003c\/strong\u003e Left and right indicators live on the gauge face, allow one on each gauge or both on the same gauge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPS speed available.\u003c\/strong\u003e Vehicle speed can come from the ECU or from the included GPS antenna, whichever reads better on your setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrightness control with automatic dimming.\u003c\/strong\u003e Set the level you want, or let the gauges dim themselves as the day turns over.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to two parameters per gauge.\u003c\/strong\u003e Run dual analog or digital styles with customizable features.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 dir=\"ltr\"\u003eThe adapter works on its own, too\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003eThe OBDLink MX+ in this kit is a full-capability scan tool, not a locked-down module. Alongside RestoTach, you can run OBDLink's own app on your phone for deeper diagnostics whenever you want it.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThat includes enhanced OEM support for Ford, GM, Mazda, Nissan and Infiniti, Toyota, Lexus and Scion, Honda, Hyundai, and Kia, which reaches manufacturer-specific systems beyond generic OBD-II: ABS, airbag, transmission, and body modules on supported vehicles.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEnhanced coverage varies by make, model, and year. Check OBDLink's compatibility guide for your vehicle before you buy.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eOne hub. Every configuration.\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003eThe hardware in this kit is the same hardware in every RestoTach kit. The only difference between them is which harness is in the box and whether an OBDLink MX+ is included. The hub itself is identical.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThat means nothing here is a dead end. Add the direct sensor harness later and the same hub reads sending units, or runs both sources side by side. Swap engines, change how the car is set up, or move the system to a different vehicle, and the hub follows you. You buy the hub once.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe system gets better after you install it. As we release new features, themes, and improvements, they download through the companion app straight to your hub and displays. No pulling the dash, no shipping hardware back, no cables. The gauges you install today keep gaining capability.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe hub also supports up to seven displays. Start with two and add more as the build comes together. New gauges join the existing bus and configure from the same app.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eMake it yours\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003eEleven built-in themes ship on every display: Base, Sports, Obsidian, Alabaster, Cobalt, Neon, GT, Square Body, Stealth, Carbon, and Classic White. Switch between them in the companion app in seconds, with no tools and no pulling the dash.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBeyond themes, you can control needle style, tick marks, numerals, custom face uploads, custom needle uploads, and full 360° face rotation, so the gauge reads level no matter how the pod ends up mounted.\u003c\/p\u003e\n\u003ch4 dir=\"ltr\"\u003eFitment\u003c\/h4\u003e\n\u003cp dir=\"ltr\"\u003eChoose the size of each of your two gauges independently. Mix and match to match your dash, or run a matched pair.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eRequires a vehicle with an OBD-II port, standard on cars and light trucks sold in the US from 1996 forward. Available parameters vary by make, model, and year.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003ePod outer diameter matches the opening. Measure your bezel clearance and depth behind the dash before ordering.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eNot intended for street use.\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eGauge size\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBezel diameter\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePod depth\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2 1\/16\"\u003c\/td\u003e\n\u003ctd\u003e2.58\"\u003c\/td\u003e\n\u003ctd\u003e1.26\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2 5\/8\"\u003c\/td\u003e\n\u003ctd\u003e3.10\"\u003c\/td\u003e\n\u003ctd\u003e1.43\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3 3\/8\"\u003c\/td\u003e\n\u003ctd\u003e3.96\"\u003c\/td\u003e\n\u003ctd\u003e1.395\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch4 dir=\"ltr\"\u003eSpecifications\u003c\/h4\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable style=\"width: 100.012%; height: 313.636px;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"height: 0px;\"\u003e\n\u003cth scope=\"col\" style=\"width: 20.0266%; height: 0px;\"\u003e\u003c\/th\u003e\n\u003cth scope=\"col\" style=\"width: 77.3358%; height: 0px;\"\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6023px;\"\u003e\n\u003ctd style=\"width: 20.0266%; height: 19.6023px;\"\u003eSizes\u003c\/td\u003e\n\u003ctd style=\"width: 77.3358%; height: 19.6023px;\"\u003e2 1\/16\", 2 5\/8\", 3 3\/8\", selectable per gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6023px;\"\u003e\n\u003ctd style=\"width: 20.0266%; height: 19.6023px;\"\u003eBrightness\u003c\/td\u003e\n\u003ctd style=\"width: 77.3358%; height: 19.6023px;\"\u003e400 nits, adjustable, with automatic time-based dimming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6023px;\"\u003e\n\u003ctd style=\"width: 20.0266%; height: 19.6023px;\"\u003eHousing\u003c\/td\u003e\n\u003ctd style=\"width: 77.3358%; height: 19.6023px;\"\u003ePA12 nylon, MJF printed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6023px;\"\u003e\n\u003ctd style=\"width: 20.0266%; height: 19.6023px;\"\u003eConnectivity\u003c\/td\u003e\n\u003ctd style=\"width: 77.3358%; height: 19.6023px;\"\u003eWi-Fi to companion app (iOS\/Android)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6023px;\"\u003e\n\u003ctd style=\"width: 20.0266%; height: 19.6023px;\"\u003eData source\u003c\/td\u003e\n\u003ctd style=\"width: 77.3358%; height: 19.6023px;\"\u003eOBD-II via included OBDLink MX+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2045px;\"\u003e\n\u003ctd style=\"width: 20.0266%; height: 39.2045px;\"\u003eAdapter\u003c\/td\u003e\n\u003ctd style=\"width: 77.3358%; height: 39.2045px;\"\u003eOBDLink MX+, usable with the OBDLink app for enhanced OEM diagnostics on supported vehicles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6023px;\"\u003e\n\u003ctd style=\"width: 20.0266%; height: 19.6023px;\"\u003eSpeed source\u003c\/td\u003e\n\u003ctd style=\"width: 77.3358%; height: 19.6023px;\"\u003eECU or included GPS antenna\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6023px;\"\u003e\n\u003ctd style=\"width: 20.0266%; height: 19.6023px;\"\u003eDiagnostics\u003c\/td\u003e\n\u003ctd style=\"width: 77.3358%; height: 19.6023px;\"\u003eRead and clear codes, readiness monitor status\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2045px;\"\u003e\n\u003ctd style=\"width: 20.0266%; height: 39.2045px;\"\u003eUpdates\u003c\/td\u003e\n\u003ctd style=\"width: 77.3358%; height: 39.2045px;\"\u003eNew features and themes download to hub and displays through the app\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6023px;\"\u003e\n\u003ctd style=\"width: 20.0266%; height: 19.6023px;\"\u003ePower\u003c\/td\u003e\n\u003ctd style=\"width: 77.3358%; height: 19.6023px;\"\u003e12V automotive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2045px;\"\u003e\n\u003ctd style=\"width: 20.0266%; height: 39.2045px;\"\u003eMax displays per hub\u003c\/td\u003e\n\u003ctd style=\"width: 77.3358%; height: 39.2045px;\"\u003e7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2045px;\"\u003e\n\u003ctd style=\"width: 20.0266%; height: 39.2045px;\"\u003eReturns \u0026amp; Warranty\u003c\/td\u003e\n\u003ctd style=\"width: 77.3358%; height: 39.2045px;\"\u003e30 days from date of shipment for returns, 120 days from date of shipment for warranty claims\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"RestoTach","offers":[{"title":"Default Title","offer_id":48046809088131,"sku":null,"price":1149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0711\/1855\/3219\/files\/ChatGPT_Image_Aug_31_2026_01_29_11_PM_7_obd.png?v=1788583781"}],"url":"https:\/\/restotach.com\/collections\/2-gauge-starter-kit.oembed","provider":"RestoTach","version":"1.0","type":"link"}